iEAC-16

Ethernet Access Chassis

iEAC-16 (Intelligent Ethernet Access Chassis), is a 2U high 19-inch chassis containing a controller MCU-16, redundant AC/DC power modules and 16 slots for various types of line cards. Including FNTU, ENTU, SNTU and VNTU, all modules are hot swappable, managed through Web GUI, CLI (Telnet and craft port).

By using different types of line card, iEAC-16 is able to extend Fast/Gigabit Ethernet traffic on 10/100/1000 Base-TX over 100/1000 Base-FX optical fiber, G.SHDSL.bis line with 2W/4W/8W, and VDSL2 line or coaxial cable. 

Designed for high density Ethernet extender installations in central offices or enterprises
Carrier Level Ethernet network over Optical fiber, G.SHDSL.bis and VDSL2 copper lines
Manageable chassis: Web GUI, CLI
Provides Fiber-Optic network traffic connection and conversion
Multi-pair copper bonding for double or quadruple bandwidth
Enables link layer OAM on the networks and equipments
Link Diagnostics with one push button
Hot swappable for all cards, Redundant powers and Green FAN available

Model

-IEAC-16, 19" chassis shelf with 16 slots for line cards

-IEAC-AC: AC Power Input: 100 ~ 240V, 50/60Hz (160W)

-iEAC-DC: DC Power Input: -36 ~ -72V (160W MTR-AC, 90~260VAC Power Module

-iEAC-16: Intelligent Ethernet Access Chassis

-MCU-16: Controller of iEAC-16 with NMS/WEB agent

-FNTU 761C/GE: 802.3ah Gigabit Ethernet Fiber MUX Network TDM Unit with Balanced E1(RJ-48)

-FNTU 761CU/GE: 802.3ah Gigabit Ethernet Fiber MUX Network TDM Unit with Unbalanced E1(BNC)

-ENTU 763C/GE: 802.3ah Gigabit Ethernet with a 1.25G SFP Transceiver slot; Optional SFP trunk module selectable;  Card type

-ENTU 763C/FE: 02.3ah Fast Ethernet NTU with a 155M SFP Transceiver slot; Optional SFP trunk module selectable; Card type

-ENTU 763GO: Optical-Electrical-Optical Converter; Card type

-SNTU 764C/2W: G.shdsl.bis 2-wire RJ-45 to 10/100Base-TX RJ-45, Card type

-SNTU 764C/4W: G.shdsl.bis 4-wire RJ-45 to 10/100Base-TX RJ-45, Card type

-SNTU 764C/8W: G.shdsl.bis 8-wire RJ-45 to 10/100Base-TX RJ-45, Card type

-SNTU 765C/4W: G.shdsl.bis 4-wire RJ-45 to 10/100Base-TX RJ-45 and E1 interface, Card type

-VNTU 766C: VDSL RJ-11 to 10/100Base-TX RJ-45, Card type

-VNTU 766CX: VDSL BNC to 10/100Base-TX RJ-45, Card type

 

Physical Slot

-iEAC-16 chassis is containing a controller MCU-16, redundant AC/DC power modules and 16 slots for three types of line cards. Including FNTU, ENTU, SNTU and VNTU, all modules are hot swappable, managed through Web GUI, CLI (Telnet and craft port).

 

Optical Interface

-Connector type: SFP-LC

 

Ethernet Interface

-Connector type: Shield RJ-45 jack

-ENTU 763S/FE: 100Base-FX SFP modules

-ENTU 763S/GE: 1000Base-X SFP modules

 

LED Indicators

-MCU-16: MAJ/MIN ALM, FAN, FAN ON, PWR1, PWR2, ETH LNK/SPD

-FNTU: PWR, LNK, TST, ALM, E1, LAN Tx/Rx, LNK/SPD

-ENTU: PWR, CO, LNK, TST, RF, TP, LAN LNK/SPD

-SNTU: PWR, CO, ALM, TST, L1~L4, ETH LNK/SPD

-VNTU: PWR, CO, LNK, TST, LAN LNK/SPD

 

Power Requirement

-Hot Swappable Redundant Power Modules:

-DC: -36 ~ -72 VDC;

-AC: 100 ~ 240V, 50 ~ 60Hz

 

Dimension

-Line cards:84(W) x 168(D) x 24(H) mm.

-iEAC-16: 480(W) x 366(D) x 89(H) mm.

 

Operating Environment

-Operation temperature: 0oC ~ 50oC

-Storage temperature: -25oC ~ 70oC

-Relative humidity: up to 90% (non-condensing)