SNTU 764 Series

Ethernet over G.SHDSL.bis Converter

The SNTU764 series, which takes advantage of the latest G.SHDSL.bis standard, is a mini-terminal enabling the transport of traffic from Ethernet interface over 5.7M/11.4M/22.8M G.SHDSL.bis link.

The SNTU764 series is a EFM G.SHDSL.bis transmission equipment for FE signal extension, aggregate FE channel into a G.SHDSL.bis link. The automatic line rate can be up to 5.7 Mbps over 2-wire cooper line. Embedded Operation Channel (EOC) is built between local and remote sides for system configuration, testing, performance and alarm monitoring of E/FE channel and G.SHDSL.bis link.

  • SNTU764 is a line card type for iEAC-16. For standalone model, please refer to Comet 1600

.Interoperable with Comet 160x series
.Point to point Ethernet extension over multiple G.SHDSL.bis copper lines
.IEEE 802.3ah EFM 2Base-TL bonding technology
.Compliant with ITU-T G.991.2 standard, TC-PAM 16/32/64/128 line coding 
.1, 2 or 4 pairs G.SHDSL.bis with 5.7Mbps per pairs
.Support extension rate up to 15Mbps over a single pair of copper
.CO and CPE mode selectable 
.Automatic line rate selection with Line Probe enabled
.Front panel status LED indicators for easy monitoring
.Easy installation with console, Telnet, WEB GUI and SNMP
.Front panel test button for easy loop diagnostic
.Provides extensive diagnostics, including loopback, G.SHDSL.bis performance monitoring
.Easy software upgrade for field-deployed units via TFTP/HTTP
.DSL line protection for data transmission
.Ethernet switching and bridging with VLAN prioritization and QoS

 

 

Model
-SNTU 764S/2W, standalone type G.shdsl.bis NTU, 2-wire, 1 Ethernet port
-SNTU 764S/4W, standalone type G.shdsl.bis NTU, 4-wire, 1 Ethernet port
-SNTU 764S/8W, standalone type G.shdsl.bis NTU, 8-wire, 1 Ethernet port
-All compatible with stand alone Comet 160x series 

Line Interface - G.SHDSL.bis
-Type: 2, 4 or 8-wire
-Standard: ITU-T G.991.2, ETSI 101 524
-Bonding protocol: IEEE 802.3ah EFM 2Base-TL
-Line rate: n x 64Kbps, n=3~89 (2w), 6~178 (4w), 12~356 (8w)
-Connector: 1xRJ-45
-Line coding: TC-PAM 16/32/64/128
-Impedance: 135 W
-ITU K.21 compliant

 
DTE Interface - Ethernet
-Ethernet type: 10/100 BaseT
-Connector: RJ-45
-Support 802.3x flow control
-Auto-MDI/MDIX detection
-Auto-negotiation for speed and duplex
-Full duplex / Half duplex support
 

Timing Source Function
-Synchronous and Plesiochronous dual clock mode
-Internal clock
-Received clock from DSL line
 

 

Ethernet L2 function
-Support 802.1d transparent bridge function
-Supporting Bridge filter function based on source MAC addresses
-Scalable per port bandwidth control (Step = 64K, up to 100M)
-2K MAC learning address
-Ethernet packet length up to 1522/*1664 bytes
-Support 802.3x flow control
-Provide 802.1q VLAN tagging
-Support 802.1p QoS facility
 

 

Management
-Configuration via craft port VT-100, Telnet, WEB GUI and SNMP*
-Multiple Web browsers supported: IE, Firefox, Chrome
-Support remote management
-Local and Remote loopback for diagnostic
-Support Performance Monitoring function
-Front panel test button for easily loop healthy testing
-Front panel reset to default button
 

LED Indicators
-SNTU 764C:
-PWR, CO, ALM, TST, L1~L4, ETH LNK/SPD 

Dimension
-84(W) x 171(D) x 24(H) mm

Operating Environment
-Operation Temperature: 0 o C ~ 50 o C
-Storage Temperature: -40 o C ~ 70 o C
-Humidity: 90%, non-condensing
DC)