SNTU 765 Series

Ethernet/E1 over G.SHDSL.bis Converter

The SNTU765 series which takes advantage of the latest G.SHDSL.bis standard, is a mini-terminal enabling the transport of traffic from Ethernet and E1 interface with speed 5.7M/11.4M over EFM bonded 2/4 wires G.SHDSL.bis link. 

The SNTU765C supports high-speed dedicated symmetrical data transmission and utilizes DSL bandwidth. The automatic line rate can be up to 5.7Mbps over 2-wire copper line. To reduce operation/management burden, SNTU765C within iEAC-16 can control and monitor remote unit via Embedded Operation Channel (EOC) by following ITU-T G.991.2. 

  • SNTU765 is a line card type for iEAC-16. For standalone model, please refer to Comet 1630

.Supports EFM and TDM Dual Bearer Mode 
.Point to point Ethernet and E1 extension over multiple G.SHDSL.bis copper lines 
.The interfaces E1 and Ethernet can work simultaneously 
.Compliant with IEEE 802.3ah EFM 2Base-TL bonding technology 
.Compliant with ITU-T G.991.2 standard, TC-PAM 16/32/64/128 line coding 
.1 or 2 pairs G.SHDSL.bis with 5.7Mbps per pairs Supports extension rate up to 15Mbps over a single pair of copper 
.CO and CPE mode selectable 
.Automatic line rate selection with Line Probe enabled 
.Front panel status LED indicators for easy monitoring 
.Easy installation with console, Telnet, WEB GUI and SNMP 
.Front panel test button with BERT for easy loop diagnostic 
.Provides extensive diagnostics, including loopback, G.SHDSL.bis and E1 performance monitoring 
.Easy software upgrade for field-deployed units via TFTP/HTTP
.DSL line protection for data transmission 
.Ethernet switching and bridging with VLAN prioritization and QoS 
.Optional temperature-controlled FAN 
.Optional Ethernet port surge protection 
.Supports security-link

.SNTU765C is a line card type which can work within iEAC-16 chassis 

Model
-  SNTU765C(Line card), 4-wire, 1 E1 G.703, 1 Ethernet port

Line Interface - G.SHDSL.bis
-  Type: 4-wire
-  Standard: ITU-T G.991.2, ETSI 101 524
-  Bonding protocol: IEEE 802.3ah EFM 2Base-TL
-  Line rate: n x 64Kbps, n=3~89 (2w), 6~178 (4w)
-  Connector: 1xRJ-45
-  Line coding: TC-PAM 16/32/64/128
-  Impedance: 135 ?
-  ITU K.21 compliant

DTE Interface - Ethernet
-  Ethernet type: 10/100 BaseT
-  Connector: RJ-45
-  Supports 802.3x flow control
-  Auto-MDI/MDIX detection
-  Auto-negotiation for speed and duplex
-  Full duplex / Half duplex support

DTE Interface - E1
-  Data Rate: 2.048 Mbps
-  Connector: RJ-45 for balanced E1 120 ? 
(Optional external convert cable for unbalanced 75 ?)
-  Line coding: HDB3
-  Framing: Framed /Framed+CRC /Unframed
-  Compliance: ITU-T G.703, G.704, G.706 and G.732
-  Jitter Performance: compliant with ITU-T G.823

Timing Source Function
-  Synchronous and Plesiochronous dual clock mode
-  Internal clock
-  Received clock from DSL line
-  External clock from E1 interface 

Ethernet L2 function
-  Supports 802.1d transparent bridge function
-  Supports Bridge filter function based on source MAC 
addresses 
-  Scalable per port bandwidth control (Step = 64K, up to 100M) 
-  2K MAC learning address
-  Ethernet packet length up to 1664 bytes
-  Supports 802.3x flow control
-  Provides 802.1q VLAN tagging
-  Supports 802.1p QoS facility

Management

-  Configuration via craft port VT-100, Telnet, WEB GUI and 
SNMP
-  Multiple Web browsers supported: IE, Firefox, Chrome
-  Console: DB9 connector (RS232C)
-  Support remote management
-  Independent Local and Remote loopback for E1 port diagnostic
-  Support Performance Monitoring function
-  Front panel test button for easy loop healthy testing
-  Front panel reset to default button

LED Indicators
-  SNTU765C:
PWR, TST, ALM, DSL, E1, ETH LNK/SPD 
-  Dual color LED for easy status monitoring

Dimension
-  84(W) x 171(D) x 24(H) mm

Operating Environment
Operation temperature: 0oC ~ 50oC
Storage temperature: -40oC ~ 70oC
- Humidity: 90%,non-condensing