Mercury Series

STM-1 DACS

The Mercury Cross Connect System supports more applications, like carrying voice channels, T1-to-E1/Data Interface conversion, industrial SCADA, Optical Mux and Mobile network connection. Plug-in interface modules supporting n x 64 Kbps, E1, T1, sub-rate and STM-1 trunk transmission over Copper, G.SHDSL, Fiber Optical. Available with the channalized Router Module, which provides the IP routing up to maximum 32 PPP links with 64 kbps data rate, or any combinations with time slots cross connect to the DDN (E1/T1, V.35 or RS-530). Router modules provide flexible solution for network management, SCADA or small branch office routing solution. For campus network, a variety of voice interfaces - E1/T1 for digital PBX, analog voice interfaces (FXS, FXO or E&M) for connecting an analog PBX or telephones are exist. Carrier-class link protections are available on E1, G.SHDSL, Fiber and STM-1. On-board router supports SNMP agent for TAINET Universal Network Management System. Mercury provides bandwidth utilize in the majority of the time.

.Non-Blocking DS0/DS1 digital cross-connection 
.Support STM-1 trunk
.3630E supports 4 Ethernet over SDH ports following standard GFP/LCAS 
.Scalable modular design 5, or 10 hot swappable I/O slots 
.Voice, Data, xDSL, Router and Fiber Modules supported 
.Link Protection works on E1, G.SHDSL, Fiber, STM-1 
.Provide FXO/FXS for PBX voice extension application 
.Tainet Universal NMS software, TFTP software upgrade available
General Features

Cross-Connection Capacity

Up to 20 E1/T1 (21th for SNMP Management)

On Board STM-1 trunk

1+1

Number of I/O Slots

5

Ethernet over SDH interface

4 (3630E)

Hot Swappable I/O Modules

Supported

ON-board router module

Channelized

Management Interface

  Craft port: VT-100 terminal/ support PPP mode
  Ethernet: Telnet / SNMP

SNMP Management

  Built-in SNMP agent
  In-band management via DS0
  Out-band management via Ethernet

Firmware Upgrade

By TFTP

Dimension

443(W) x 305(D) x 44(H) mm

Diagnostics

Loopback

User-controlled loopback: local (analog) loopback and remote (digital) loopback.

Power Requirement

Input

Build-in AC or DC power supply
Redundant power module

Power Consumption

< 27W

Environments

Temperature

Operating Temperature : 0 °C ~ 50 °C
Storage Temperature : -25 °C ~ 70 °C

Humidity

Humidity: 0 ~ 95% RH (non-condensing)

Certification

  FCC Part 15 Class A
  EN50082-1/EN50082-2
  IEC-950