Comet 1600R

Industrial G.SHDSL.bis EFM Modem

The Comet 1600R series industrial G.SHDSL.bis Ethernet extender is in compliance with EN50121-4 ETS EMC. This proves that not only can TAINET products operate and sustain on railways, but they can also work well under harsh conditions. Comet 160xR EFM series supports high-speed dedicated symmetrical data transmission and utilizes DSL bandwidth. The automatic adjusting line rate can be up to 15Mbps over 2-wire copper line symmetrically. Comet 1602R/1604R series typically works as an Ethernet extender, with up to 4 wires that could enhance the line rate and provide aggregated bandwidth up to 30Mbps.
  • Comet 1600R is a standalone model. For line card type compatible to iEAC-16, please refer to SNTU764

.Symmetric H.264 or MPEG4 HD quality video streaming over 3Km
.Point to point Ethernet extension over multiple copper lines 1 or 2 pairs G.SHDSL.bis with 15Mbps per pairs 
.Supports extension rate up to 30Mbps over 2 pairs of copper 
.Easy installation with DIP switch, Telnet, WEB GUI and SNMP
.Automatic line rate selection with Line Probe enabled 
.Front panel status LED indicators for easy monitoring 
.Front panel test button with BERT for easy loop diagnostic 
.Easy software upgrade for field-deployed units via TFTP 
.DSL line protection for data transmission 
.Ethernet switching and bridging with VLAN prioritization and QoS 
.Supports security-link 
.CO and CPE mode selectable 
.Optional Ethernet port surge protection 
.Compliant with IEEE 802.3ah EFM 2Base-TL bonding technology 
.Compliant with ITU-T G.991.2 standard, TC-PAM 16/32/64/128 line coding

Model

-       Comet 1602R, 2-wire, 4 Ethernet ports

-       Comet 1604R, 4-wire, 4 Ethernet ports

Line Interface - G.SHDSL.bis

-       Type: 2 or 4-wire

-       Standard: ITU-T G.991.2, ETSI 101 524

-       Bonding protocol: IEEE 802.3ah EFM 2Base-TL

-       Line rate: n x 64Kbps, n=3~239 (2w), 6~478 (4w)

-       Rate1: Symmetric 10Mbps over 3Km@24AWG (0.5mm)

-       Rate2: Symmetric 384Kbps over 9Km@24AWG (0.5mm)

-       Connector: 1xRJ-45

-       Line coding: TC-PAM 16/32/64/128

-       Impedance: 135 ohm

DTE Interface - Ethernet

-       Ethernet type: 10/100 BaseT

-       Connector: RJ-45

-       Supports 802.3x flow control

-       Auto-MDI/MDIX detection

-       Auto-negotiation for speed and duplex

-       Full duplex / Half duplex support

Ethernet L2 function

-       Supports 802.1d transparent bridge function

-       Supports Bridge filter function based on source MAC addresses

-       Scalable per port bandwidth control (Step = 64K, up to 100M)

-       2K MAC learning address

-       Ethernet packet length up to 1664 bytes

-       Supports 802.3x flow control

-       Provides 802.1q VLAN tagging

-       Supports 802.1p QoS facility

Management

-       Configuration via DIP switch, Telnet, WEB GUI and SNMP

-       Multiple Web browsers supported: IE, Firefox, Chrome

-       Supports remote management

-       Local and Remote loopback for diagnostic

-       Supports Performance Monitoring function

-       Front panel test button for easy loop healthy testing

-       Front panel reset to default button

LED Indicators

-       PWR, TST, ALM, CPE, DSL1~2, LAN1~4

-       Dual color LED for easy status monitoring

Power Requirement

-       9~36VDC or 18~60VDC

-       Power consumption: 6W

Certification

-       ISO 9001 Quality Management

-       China CCC Quality Certification

-       CE Approval, EN 55022, 55024, 61000-3

-       CE LVD Safety, IEC-60950-1, EN 60950-1

-       FCC Part 15, CISPR 22, ANSI C63.4

-       Railway EMC 50121-4

-       ITU-T K.21 Compliant

Dimension

-       210(W) x 146(D) x 37(H) mm

Operating Environment

-      Operation Temperature: 0 °C ~ 75 °C

-      Storage Temperature: -40 °C ~ 85 °C

 

-      Humidity: 90%, non-condensing