ITU Modem
C-192/288 Series
How to apply the Challenger 192 to an X.25 network and HDLC connection?
Update firmware version 2.03D to a newer version:
Originate site :
1.
Load factory profile #2
2.
Set S-register to: S21bit0 -> 1, S21bit6 -> 1 from front panel (DCD, DSR normal)
Originate site :
3.
Load factory profile #2
4..
Set S-register to: S21bit0 -> 1, S21bit6 -> 1 from front panel (DCD, DSR normal)
5.
Set S-register to: S0=2 (Auto answer), S14bit4 -> 1 (Dumb mode)
Best display resolution 1024 x 768. Copyright © 2006 by TAINET Communication System Corp.
