TAINET OLT 9700 Series complies with ITU-T G.984/G.988 and meets requirements about GPON OLT in Network Access Technical Requirements. TAINET OLT 9700 Series supports the Asymmetric uplink 1.25Gbps/downlink 2.5Gbps PON transmission rate, efficient bandwidth usage and Ethernet services, helping carriers to provide reliable services to their users. Its coupling ratio ups to 1:128, and its support of different hybrid ONU networks minimize the carrier’s investment. 
TAINET OLT 9700 Series, based on the edge-cutting technologies, is strong in functions. A few of its functions such as QoS guarantee, SLA and DBA can be easily listed out.

Request A Quote  Datasheet

  • Features

    • Support ITU-T G.984/G.988, meets relevant requirements of GPON OLT regulated in Network Access Technical Requirements
    • 4 gigabit SFP ports, 4 gigabit combo ports and 4 10GE SFP+ ports.
    • Low power consumption and low operating cost
    • The link can be automatically switched when trouble occurs in the optical fiber
    • Supports dual-AC, dual-DC and AC/DC power supply. The power supply supports modularized design, hot-swap and EMC-3 standard. It well adapts to the environment.
  • Specifications

    • OLT 9700/8P: 8 PON, 4*10GE ports or 8*GE ports (4*Gigabit SFP ports, 4*Gigabit TX/SFP combo ports)
    • OLT 9700/16P: 16 PON, 4*10GE ports or 8*GE ports (4*Gigabit SFP ports, 4*Gigabit TX/SFP combo ports)
    System Capacity
    • Maximum coupling ratio: 1:128
    • Backplane bandwidth: 205G
    • MAC table capacity: 64K
    PON Interface
    • Downlink 2.5Gbps / Uplink 1.25Gbps
    • Class B+ and Class C+ GPON module
    • Security: ONU authentication mechanism
    • ITU-T G.984/G.988
    • IEEE 802.1D Spanning Tree
    • IEEE 802.1Q VLAN
    • IEEE 802.1w RSTP
    • IEEE 802.3ad physical link static/dynamic aggregation (LACP)
    • Ethernet – II
    • Port based VLAN
    • QinQ and flexible QinQ
    • L2 Multicast
    • IGMP Snooping
    • MLD-Snooping
    • Backpressure flow control (half duplex)
    • IEEE 802.3x flow control (full duplex)
    • IEEE 802.1p CoS
    • WRR, SP and FIFO queue schedule
    • Limiting the uplink/downlink rate based on each ONU
    • DBA and SLA
    • Loop detect
    • Dying – Gasp
    • Unidirectional Link Detection (UDLD)
    • Hot swap of the GPON optical module
    • Optical path protection of GPON (type B/C, hand-in-hand)
    • Abnormal luminescence ONU detection such as long luminescence
    • Limiting the maximum number of users on each port
    • Port isolation
    • Packet storm control
    • Flow-based ACL access control function
    • Transmission data encryption on the PON interface
    • CLI, Web, SNMP and Telnet
    • Software upgrade through TFTP and Web
    • Debug output
    Physical Characteristics
    • 442.5(W) x 304(D) x 44(H) mm
    • Installation: standard 19-inch rack-mounted
    • Weight: 5.25Kg
    Heat Dissipation
    • Supports long-time use
    • The device running hot will not affect the performance or cause break down
    • Operating temperature: 0℃ ~ 45℃; 10% ~ 85% non-condensation
    • Storage temperature: -40℃ ~ 80℃; 5% ~ 95% non-condensation
    Power Supply
    • Input voltage: AC 90~240V, DC 36~72V
    • Dual-power input, DC/AC power supply and hot-swap
  • Application