Ethernet DSL Bridge Modem
previous arrow
next arrow
Ethernet DSL Bridge Modem
EFM Bonding G.SHDSL
SHDSL 802.3ah OAM
DSL Ethernet Extender
ADSL VDSL Advantage G.SHDSL.bis
ITUT G.991.2
previous arrow
next arrow

G.SHDSL.bis EFM/ ATM Ethernet Router

TAINET Comet 160xF EFM/ATM series is the so called Ethernet Access Devices (EAD), Ethernet Media Data Converter (MDC) or Ethernet DSL Bridge/ Router/ Modem, which takes advantage of the latest G.SHDSL.bis standard. This mini-terminal enables the transport of traffic from Ethernet interface with speed of 15M/30/60 Mbps over EFM bonded 2/4/8 wires G.SHDSL.bis link.
Comet 160xF EFM/ATM series supports high-speed dedicated symmetrical data transmission and utilizes DSL bandwidth. The automatic line rate adjusting can be up to 15Mbps over 2-wire copper line symmetrically. Comet 1602F/1604F/1608F series typically works as an Ethernet extender, with up to 8 wires that could enhance the line rate and provide aggregated bandwidth up to 60Mbps. Furthermore, Comet 160xF EFM/ATM series is fully compatible with TAINET iEAC-16, the intelligent Ethernet access chassis. This combination is designed to work as a central office especially for long distance Ethernet Access Service. It covers the ADSL/VDSL’s disadvantages of distance limitation by offering multi-pair bonding services.
Comet 160xF EFM/ATM series is an ideal solution for Telecom Carriers, Service Providers and business users. In order to reduce operation/management burden, based on ITU-T recommendation G.991.2 standards, Comet 160xF EFM/ATM series can control and monitors its remote units via the Embedded Operation Channel (EOC). Administrators of Comet 160xF EFM/ATM series are entitled to configure the modems through DIP-Switch, Console, Telnet (SSH), Web (HTTP/HTTPS), TR-069 or SNMP v1/v2c/v3 agent with ease.

               

  • Features

    • Point to point Ethernet extender over multiple copper wires
    • EFM mode complies with ITU-T G.991.2 standard, TC-PAM
    • 4/8/16/32/64/128 line coding and IEEE 802.3ah 2Base-TL bonding.
    • ATM mode complies with RFC 1483 and RFC 2684 Multiprotocol
    • over AAL5 bridged mode.
    • 1, 2 or 4 pairs G.SHDSL.bis with 5.7Mbps per pair
    • Supports extension rate up to 60Mbps over 4 pairs of copper
    • CO and CPE mode configurable
    • Automatic line rate selection uses Line Probe function
    • Front panel LED indicators for ease of status monitoring
    • Easy installation by DIP-Switches, Console, Telnet (SSH), WEB
    • GUI(HTTPS), SNMP (v1/v2c/v3) or TR-069
    • Remote software upgrade for field-deployed units via TFTP or
    • HTTP/HTTPS
    • Ethernet switching and bridging with VLAN prioritization and QoS
    • Router function supports NAT/PAT, DNS relay, DHCP client/ server/
    • relay, RIP1/RIP2 and Static route.
    • Support security-link feature and DSL line protection for data
    • transmission
  • Specifications

    Model
    • Comet 1602F, 2-wire, 4 Ethernet ports
    • Comet 1604F, 4-wire, 4 Ethernet ports
    • Comet 1608F, 8-wire, 4 Ethernet ports
    Line Interface: G.SHDSL.bis
    • Type: 2, 4 or 8-wire
    • EFM Standard: ITU-T G.991.2, ETSI 101 524
    • Bonding protocol: IEEE 802.3ah EFM 2Base-TL
    • ATM Standard: RFC 1483/2684 Multiprotocol over AAL5
    • bridged and RFC 1577 IP over ATM
    • Line rate: n x 64Kbps, n=3~239 (2w), 6~478 (4w), 12~956(8w)
    • Connector: 1 x RJ-45
    • Line coding: TC-PAM 16/32/64/128
    • Impedance: 135 
    DTE Interface: Ethernet
    • Ethernet type: 10/100BaseT
    • Connector: 4 x RJ-45
    • Auto-MDI/MDIX detection, Full/half duplex support
    • Auto-negotiation for speed and duplex
    • Support Layer 2 function
    • IPv4/IPv6 supports
    Ethernet Networking Function
    • Supports 802.1d transparent bridge function
    • Supports Bridge filter function based on source MAC
    • addresses
    • Scalable per port bandwidth control (Step = 64K, up to 100M)
    • Supports 802.3x flow control
    • 2K MAC learning address
    • Ethernet packet length 9K Jumbo frame for LAN and up to
    • 2048 bytes for WAN
    • Provides 802.1q VLAN tagging, up to 4094 VLAN and VID
    • Supports 802.1p QoS facility
    • ITU-T G.8032 Ethernet Ring Protection switching (ERPS)
    • Support SNTP protocol to get network time
    • DHCP Client/ Server/ Relay
    • Static Routing protocol and dynamic routing protocol include RIPv1/v2, OSPFv2, BGP-4 and Virtual Router Redundancy Protocol (VRRP)
    • Support Point to point PPPoE/ PPTP/ L2TP/ IPSec
    • Network and Port Address Translation (NAT & NAPT)
    • Virtual IP for different VLAN (LAN supports dual IP)
    • Firewall Anti-DDOS attack & ACL security protection
    Management
    • Configuration via DIP switches, Telnet (SSH), WEB GUI
    • (HTTP/HTTPS) , SNMP v1/v2c/v3 and TR-069
    • Console: DB9 connector (RS232C)
    • TACACS+ (Terminal Access Controller Access Control System) for Authentication, Authorization, and Accounting
    • Local and Remote status for diagnostic
    • Supports Performance Monitoring function (PM)
    • Firmware upgradeable via Web or TFTP
    • Front panel test button for easy loop healthy testing
    • Front panel reset to default button
    • Support three access levels for administrator, operator,
    • user and operation log
    • Support login password complexity of 6 characters,
    • uppercase and lowercase letters, digits, special symbols
    • Anti camouflage attack mechanism: lock IP and delay
    • login
    • Dying Gasp function indicates the CPE mode lost power
    LED Indicators
    • PWR, TST, ALM, CPE, DSL1~4, LAN1~4
    • Dual color LED for easy status monitoring
    Power Requirement
    • 100~240V AC to 12VDC adapter (Comet 160xF)
    • DC 48V (Comet 160xF/DC48)
    • Power consumption: 7W
    Certification
    • ISO 9001 Quality Management
    • CE Approval, EN 55032, 55024, 61000-3-2, 61000-3-3
    Dimension
    • 200(W) x 150(D) x 39(H) mm
    Operating Environment
    • Operation Temperature: 0°C ~ 50°C
    • Storage Temperature: -20°C ~ 75°C
    • Humidity: 90%, non-condensing
  • Diagram