G.SHDSL.bis EFM/ATM Modem – Router DIP Switch

TAINET’s G.SHDSL.bis Comet 160xF EFM/ATM series is the so called Ethernet Access Devices (EAD), Ethernet Media Data Converter (MDC) or Ethernet DSL Bridge/ Router/ Modem, which takes advantage of the latest G.SHDSL.bis standard. This mini-terminal enables the transport of traffic from Ethernet interface with speed of 15M/30/60 Mbps over EFM bonded 2/4/8 wires G.SHDSL.bis link.
Comet 160xF G.SHDSL.bis EFM/ATM series supports high-speed dedicated symmetrical data transmission and utilizes DSL bandwidth. The automatic line rate adjusting can be up to 15Mbps over 2-wire copper line symmetrically. Comet 1602F/1604F/1608F series typically works as an Ethernet extender, with up to 8 wires that could enhance the line rate and provide aggregated bandwidth up to 60Mbps. Furthermore, Comet 160xF EFM/ATM series is fully compatible with TAINET iEAC-16, the intelligent Ethernet access chassis. This combination is designed to work as a central office especially for long distance Ethernet Access Service. It covers the ADSL/VDSL’s disadvantages of distance limitation by offering multi-pair bonding services.
Comet 160xF G.SHDSL.bis EFM/ATM series is an ideal solution for Telecom Carriers, Service Providers and business users. In order to reduce operation/management burden, based on ITU-T recommendation G.991.2 standards, Comet 160xF G.SHDSL.bis EFM/ATM series can control and monitors its remote units via the Embedded Operation Channel (EOC). Administrators of Comet 160xF EFM/ATM series are entitled to configure the modems through DIP-Switch, Console, Telnet (SSH), Web(HTTP/HTTPS), TR-069 or SNMP v1/v2c/v3 agent with ease.

Request A Quote  Datasheet

  • Features

    • Point to point Ethernet extender over multiple copper wires
    • EFM mode complies with ITU-T G.991.2 standard, TC-PAM
    • 4/8/16/32/64/128 line coding and IEEE 802.3ah 2Base-TL bonding.
    • ATM mode complies with RFC 1483 and RFC 2684 Multiprotocol
    • over AAL5 bridged mode.
    • 1, 2 or 4 pairs G.SHDSL.bis with 5.7Mbps per pair
    • Supports extension rate up to 60Mbps over 4 pairs of copper
    • CO and CPE mode configurable
    • Automatic line rate selection uses Line Probe function
    • Front panel LED indicators for ease of status monitoring
    • Easy installation by DIP-Switches, Console, Telnet (SSH), WEB
    • GUI(HTTPS), SNMP (v1/v2c/v3) or TR-069
    • Remote software upgrade for field-deployed units via TFTP or
    • Ethernet switching and bridging with VLAN prioritization and QoS
    • Router function supports NAT/PAT, DNS relay, DHCP client/ server/
    • relay, RIP1/RIP2 and Static route.
    • Support security-link feature and DSL line protection for data
    • transmission
  • Specifications

    • Comet 1602F, 2-wire, 4 Ethernet ports
    • Comet 1604F, 4-wire, 4 Ethernet ports
    • Comet 1608F, 8-wire, 4 Ethernet ports
    Line Interface: G.SHDSL.bis
    • Type: 2, 4 or 8-wire
    • EFM Standard: ITU-T G.991.2, ETSI 101 524
    • Bonding protocol: IEEE 802.3ah EFM 2Base-TL
    • ATM Standard: RFC 1483/2684 Multiprotocol over AAL5
    • bridged and RFC 1577 IP over ATM
    • Line rate: n x 64Kbps, n=3~239 (2w), 6~478 (4w), 12~956(8w)
    • Connector: 1 x RJ-45
    • Line coding: TC-PAM 16/32/64/128
    • Impedance: 135 
    DTE Interface: Ethernet
    • Ethernet type: 10/100BaseT
    • Connector: 4 x RJ-45
    • Auto-MDI/MDIX detection, Full/half duplex support
    • Auto-negotiation for speed and duplex
    • Support Layer 2 function
    • IPv4/IPv6 supports
    Ethernet Networking Function
    • Supports 802.1d transparent bridge function
    • Supports Bridge filter function based on source MAC
    • addresses
    • Scalable per port bandwidth control (Step = 64K, up to 100M)
    • Supports 802.3x flow control
    • 2K MAC learning address
    • Ethernet packet length 9K Jumbo frame for LAN and up to
    • 2048 bytes for WAN
    • Provides 802.1q VLAN tagging, up to 4094 VLAN and VID
    • Supports 802.1p QoS facility
    • ITU-T G.8032 Ethernet Ring Protection switching (ERPS)
    • Support SNTP protocol to get network time
    • DHCP Client/ Server/ Relay
    • Static Route and RIP1/ RIP2 dynamic routing
    • Point to Point over Ethernet (PPPoE) protocol support
    • Network and Port Address Translation (NAT & NAPT)
    • Virtual IP for different VLAN (LAN supports dual IP)
    • Firewall Anti-DDOS attack & ACL security protection
    • Configuration via DIP switches, Telnet (SSH), WEB GUI
    • (HTTP/HTTPS) , SNMP v1/v2c/v3 and TR-069**
    • Console: DB9 connector (RS232C)
    • Local and Remote status for diagnostic
    • Supports Performance Monitoring function (PM)
    • Firmware upgradeable via Web or TFTP
    • Front panel test button for easy loop healthy testing
    • Front panel reset to default button
    • Support three access levels for administrator, operator,
    • user and operation log
    • Support login password complexity of 6 characters,
    • uppercase and lowercase letters, digits, special symbols
    • Anti camouflage attack mechanism: lock IP and delay
    • login
    • Dying Gasp function indicates the CPE mode lost power
    LED Indicators
    • PWR, TST, ALM, CPE, DSL1~4, LAN1~4
    • Dual color LED for easy status monitoring
    Power Requirement
    • 100~240V AC to 12VDC adapter (Comet 160xF)
    • DC 48V (Comet 160xF/DC48)
    • Power consumption: 7W
    • ISO 9001 Quality Management
    • China CCC Quality Certification
    • CE Approval, EN 55022, 55024, 61000-3-2, 61000-3-3
    • CE LVD Safety, IEC-60950-1, EN 60950-1
    • ITU-T K.21 Compliant
    • 200(W) x 150(D) x 39(H) mm
    Operating Environment
    • Operation Temperature: 0 °C ~ 50 °C
    • Storage Temperature: -20 °C ~ 75 °C
    • Humidity: 90%, non-condensing
  • Application