10Gb Fiber Ethernet Switch – ENTU 783

TAINET’s Ethernet Network Terminal Unit Series allows the operator to separate each user’s traffic and offer services such as inter-office LAN connectivity, Internet access and virtual local area networks (VLAN). This approach extends the service over fiber, facilitating management of differentiated services up to the customer premises while ensuring service level agreement (SLA) enforcement. ENTU 783 series is so called Ethernet Media Data Converter (MDC), It can convert 100M/1G/2.5G/5G/10G electrical Ethernet to 1000Base-X or 10GBase-R via optical fiber cable to extend transmission distance. 

Request A Quote  Datasheet

  • Features

    • One Copper Interface: Comply with IEEE 802.3u/ 802.3ab/ 802.3bz/ 802.3an standard as 100Base-Tx/ 1000Base-T/ NBase- T/ 10GBase-T (100M/1G/2.5G/5G/10G), Auto Negotiation
    • Three Optical Fiber Interface: Comply with IEEE 802.3z and 802.3ae standard as 1000Base-X and 10GBase-R, those use SFP+ to 10GBASE-SR, 10GBASE-LR, 10GBASE-ER or 10GBASE-ZR for different transmission distance and wavelength
    • Compact size, Triple optical ports Media Data Converter (MDC) in one mini box.
    • Support IEEE 802.3ah In-band OAM for remote management
    • Comply with SFF-8472 industry-standard and support SFP DDM
    • (Digital Diagnostics Monitoring)
    • Support IEEE 802.3x Flow Control, Auto MDI/MDIX
    • Support cable diagnostics feature for copper wires
    • Comply with IEEE 802.1q Tag based VLAN
    • Support IEEE 802.1ad Q-in-Q function
    • Maximum Frame size 12K bytes (Jumbo frame)
    • Ethernet Storm and Bandwidth control (Rate Limit)
    • Support port trunking and STP/ RSTP for loop prevention
    • Provide RMON counter, ACL, Mirror and VLAN Translation.
    • Laser Auto-shutdown, LLCF and RFD for optical link protection.
    • Management by Web (HTTPs) and SNMP V1/V2c/V3 supported
    • Report all alarm status to the designated NMS and computer terminal interface
  • Specifications

    • ENTU 783S, Triple optical link 10G Ethernet NTU Standalone
    • ENTU 783C, Triple optical link 10G Ethernet NTU card type
    Network Interface: Optical SFP
    • Connector type: 3 x SFP+
    • 10GBase-R or 1000Base-X port
    • Allow for 10GBASE-SR, 10GBASE-LR, 10GBASE-ER and 10GBASE-ZR in different transmission distance
    • Automatic Laser Shutdown (ALS)
    • IEEE 802.3ad Port Trunking: Bandwidth Aggregation by join
    • Support SFP DDM (Digital Diagnostic Monitoring):

    Compliant with SFF-8472 SFP DDM (Digital Diagnostic
    Monitoring), include temperature, supply voltage, bias
    current, transmitted and received power

    User Interface: Ethernet
    • Connector type: One shield RJ-45 jack
    • Auto-negotiation 100M/1G/2.5G/5G/10G different speed – Auto-MDI/MDIX detection
    • Support cable diagnostics feature for copper wires
    Networking Function
    • Link Transparent in Media Data Converter (MDC) mode – IEEE 802.3x Flow Control
    • Ethernet bandwidth control
    • RMON counter
    • Ethernet Port Mirror
    • Maximum frame size up to 12k byte (Jumbo Frame) – Complies with IEEE 802.1p QoS
    • DHCP & SNTP Client
    • VLAN Translation
    • IEEE 802.1q Tagged based VLAN
    • IEEE 802.1ad Q-in-Q
    • IEEE 802.3az Energy Efficient Ethernet
    • IEEE 802.1d STP, IEEE 802.1w RSTP
    Management & OAM Functions
    • Quick setup MDC or Ethernet Switch mode via DIP switch
    • Configure via WEB (HTTPs) or SNMP V1/V2c/V3
    • RJ45 connector (RS232C): Craft port
    • TFTP/HTTP firmware upgrade
    • Reset button back to factory default
    • Support warning threshold for setting the upper and lower limit of optical parameters to send a warning message
    • Support IEEE 802.3ah Link Layer OAM
    • Auto discovery
      Link monitoring
      Loopback test
      Dying Gasp
      Fully remote control device

    • Enhanced Login security check
    • Three access levels for administrator, operator, user and operation log
    • Support login password complexity of 6 characters, lower and uppercase letters, digits, special symbols
    • Anti camouflage attack mechanism: lock IP and delay login
    LED Indicators
    • PWR, Port 1~4: LNK/SPD
    Power Requirement
    • AC/DC, DC/DC external power adapter (12V, 2A)
    • Power consumption < 15W
    • ENTU 783: 89(W) x 175(D) x 37(H) mm
    Operating Environment
    • Operating temperature: 0 oC ~ 50 oC
    • StorageTemperature: -20oC~70oC
    • Humidity: 90%, non-condensing
  • Application